SPI 2.1 VOC Production Clear is an excellent long-term UV holdout with high gloss. Its new resin system requires only low-temperature, low-time baking cycles which can lower your energy costs.

It is water-like in color, so it will not affect white blend jobs and may be used for spot repairs and all-overs alike.

It may be used over any basecoat after proper flash times. It may also be used over catalyzed enamels or polyurethane coatings after a minimum of 8 hours but preferably overnight.

Mixing: Mix 4 parts Production Clear to 1 part activator. 900-4 Polar Accelerator may be added at 1-2oz per mixed quart of clear. 925-4 Urethane Retarder may be added at 1-3oz per mixed quart of clear.

Spraying: The best way to spray this clear is to adjust your gun so you lay the clear the way you want it to look. Spray one wet coat. If you're doing an all-over and it's hot, you may spray 2 wet coats back to back if you desire. If you're spraying only a couple of panels, spray your first coat then wait 10-30 minutes before applying your second coat.

Buffing: Always let it set overnight before buffing. Production Clear will buff best in the first 3 days but will still buff good for the next 7 days.

Southern Florida dealer.